Hi Denny, I'm converting a Lark into a taildragger, yes this is a huge project and the aircraft will qualify for the amature built category here in Canada when done.
Denny, any info you have regarding the rigging of the wings or special tools that may be needed would be of great benifit to me.
If you have the time, give me a shout. I would be iterested in the tools needed and data.
Warmest Regards
John Willis
jwillis@mts.net
Quote:
|
Originally Posted by Denny of Oakland
I would not adjust the attach bolt eccentric’s unless you have a mechanic that has performed this task before. There is a certain procedure that should be followed to the letter of the law. Taking exact measurement before and during the wing rigging should be noted. Over the years I have made special tools for adjusting the eccentric bolts. If the adjustment is made incorrectly all kinds of bad things happen to the angle of attack, which will affect the flight controls.
If the maintenance manual does not explain how to adjust the eccentric’s I would suggest contacting the manufacture for assistance. If the manufacture does not want to assist you can contact me and I will help you obtain the correct data. This is a very important task.
Denny of Oakland
|