(b) Except as provided in paragraph (c) of this section, no certificate holder may use any person, nor may any person serve, as pilot in command to or from an airport determined to require special airport qualifications unless, within the preceding 12 calendar months:
(1) The pilot in command or second in command has made an entry to that airport (including a takeoff and landing) while serving as a pilot flight crewmember; or
(2) The pilot in command has qualified by using pictorial means acceptable to the Administrator for that airport.
(c) Paragraph (b) of this section does not apply when an entry to that airport (including a takeoff or a landing) is being made if the ceiling at that airport is at least 1,000 feet above the lowest MEA or MOCA, or initial approach altitude prescribed for the instrument approach procedure for that airport, and the visibility at that airport is at least 3 miles.
(d) No certificate holder may use any person, nor may any person serve, as pilot in command between terminals over a route or area that requires a special type of navigation qualification unless, within the preceding 12 calendar months, that person has demonstrated qualification on the applicable navigation system in a manner acceptable to the Administrator, by one of the following methods:
(1) By flying over a route or area as pilot in command using the applicable special type of navigation system.
(2) By flying over a route or area as pilot in command under the supervision of a check airman using the special type of navigation system.
(3) By completing the training program requirements of appendix G of this part.
[Doc. No. 17897, 45 FR 41594, June 19, 1980]