(b) For metallic components, compliance with paragraph (a) of this section may be shown by—
(1) Bonding the components properly to the airframe; or
(2) Designing the components so that a strike will not endanger the airplane.
(c) For nonmetallic components, compliance with paragraph (a) of this section may be shown by—
(1) Designing the components to minimize the effect of a strike; or
(2) Incorporating acceptable means of diverting the resulting electrical current so as not to endanger the airplane.
[Amdt. 23–7, 34 FR 13092, Aug. 13, 1969]
NEXT: Sec. 23.871 - Leveling means.
PREVIOUS: Sec. 23.865 - Fire protection of flight controls, engine mounts, and other flight structure.