Contact|RisingUp Home

Federal Aviation Regulations

Sec. 27.1017 — Oil lines and fittings.

(a) Each oil line must be supported to prevent excessive vibration.

(b) Each oil line connected to components of the rotorcraft between which relative motion could exist must have provisions for flexibility.

(c) Flexible hose must be approved.

(d) Each oil line must have an inside diameter of not less than the inside diameter of the engine inlet or outlet. No line may have splices between connections.

NEXT: Sec. 27.1019 - Oil strainer or filter.
PREVIOUS: Sec. 27.1015 - Oil tank tests.

Search the FARS for