(2) Likely to deteriorate in service before normal replacement; or
(3) Subject to appreciable variability due to—
(i) Uncertainties in manufacturing processes; or
(ii) Uncertainties in inspection methods.
(b) For each part to which §§27.621 through 27.625 apply, the factor of safety prescribed in §27.303 must be multiplied by a special factor equal to—
(1) The applicable special factors prescribed in §§27.621 through 27.625; or
(2) Any other factor great enough to ensure that the probability of the part being understrength because of the uncertainties specified in paragraph (a) of this section is extremely remote.